天游平台

  • Home      Log In      Contacts      FAQs      INSTICC Portal
     

    Call for Papers

    ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

    SCOPE

    The purpose of the 17th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

    Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

    Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

    CONFERENCE AREAS

    Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

    1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
    2. ROBOTICS AND AUTOMATION
    3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
    4. INDUSTRIAL INFORMATICS


    AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


    • Decision Support Systems
    • Distributed Control Systems
    • Engineering Applications on Intelligent Control Systems and Optimization
    • Evolutionary Computation and Control
    • Fuzzy Control
    • Genetic Algorithms
    • Hybrid Learning Systems
    • Intelligent Fault Detection, Diagnosis and Prognostics
    • Knowledge-Based Systems Applications
    • Machine Learning in Control Applications
    • Neural Networks Based Control Systems
    • Optimization Algorithms
    • Planning and Scheduling
    • Soft Computing
    • Software Agents for Intelligent Control Systems

    AREA 2: ROBOTICS AND AUTOMATION


    • Autonomous Agents
    • Cognitive Approach for Robotics
    • Collective and Social Robots
    • Control and Supervision Systems
    • Engineering Applications on Robotics and Automation
    • Guidance, Navigation and Control
    • Human-Machine Interfaces
    • Humanoid Robots
    • Human-Robots Interfaces
    • Image Processing
    • Industrial Networks and Automation
    • Intelligent Transportation Technologies and Systems
    • Mechatronics Systems
    • Mobile Robots and Intelligent Autonomous Systems
    • Modelling, Simulation and Architecture
    • Network Robotics
    • Perception and Awareness
    • Robot Design, Development and Control
    • Space and Underwater Robots
    • Surveillance, Fault Detection and Diagnosis
    • Telerobotics and Teleoperation
    • Vehicle Control Applications
    • Virtual Environment, Virtual and Augmented Reality
    • Vision, Recognition and Reconstruction

    AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


    • Adaptive Signal Processing and Control
    • Biological Inspired Sensors
    • Computer and Microprocessor-Based Control
    • Defect and Change Detection and Identification
    • Engineering Applications
    • Environmental Monitoring and Control
    • Information-Based Models for Control
    • Intelligent Components for Control
    • Mechanical, Force and Tactile Sensors
    • Modelling, Analysis and Control of Discrete-Event Systems
    • Modelling, Analysis and Control of Hybrid Dynamical Systems
    • Nonlinear Signals and Systems
    • Optimization Problems in Signal Processing
    • Real-Time Systems Control
    • Sensors Fusion
    • Signal Reconstruction
    • System Identification
    • System Modelling
    • Time-Frequency Analysis

    AREA 4: INDUSTRIAL INFORMATICS


    • Computer-Based Manufacturing Technologies
    • Energy Efficiency and Green Manufacturing
    • Human Factors & Human-System Interface
    • Industrial Automation and Robotics
    • Industrial Internet of Things
    • Intelligent Design and Manufacturing
    • Manufacturing Systems Engineering
    • Performance Evaluation and Optimization
    • Precision Engineering
    • Production Planning, Scheduling and Control
    • Production Tasks' Design, Planning and Management
    • Quality Control and Management
    • Resources and Knowledge Management in Industry
    • Supply Chain and Logistics Engineering
    • Systems Modelling and Simulation

    KEYNOTE SPEAKERS

    Roland SiegwartAutonomous Systems Lab & Wyss Zurich, ETH Zurich, Switzerland
    Eduardo F. CamachoUniversity of Seville, Spain
    Jean-Michel CoronUniversité Pierre et Marie Curie, France

    PAPER SUBMISSION

    Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

    Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

    Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

    PUBLICATIONS

    All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
    SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
    The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), DBLP, EI (Elsevier Engineering Village Index), Scopus, Semantic Scholar, Google Scholar and Microsoft Academic.

    SECRETARIAT

    ICINCO Secretariat
    Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
                 2900-616 Setúbal - Portugal
    Tel.: +351 265 520 185
    Fax: +351 265 520 186
    e-mail: icinco.secretariat@insticc.org
    Web: http://www.www.caolimin.com.cn

    VENUE

    Available soon.

    CONFERENCE CO-CHAIRS

    Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France
    Janan ZaytoonUniversity of Reims Champagne Ardennes, France

    PROGRAM CHAIR

    Oleg GusikhinFord Motor Company, United States

    PROGRAM COMMITTEE MEMBERS

    Srinivasan A, Caledonian College of Engineering, Galsgow Caledonian University, Oman
    Ghassan Abu-Lebdeh, American University of Sharjah, United Arab Emirates
    Andrew Adamatzky, University of the West of England, United Kingdom
    El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
    Eugenio Aguirre, University of Granada, Spain
    Rudy Agustriyanto, University of Surabaya, Indonesia
    Qingsong Ai, Wuhan University of Technology, China
    Carlos Aldana, University of Guadalajara, Mexico
    Manuel Aleixandre, Tokyo Institute of Technology, Japan
    Adel Al-Jumaily, University of Technology Sydney, Australia
    Erdinç Altug, Istanbul Technical University, Turkey
    Yacine Amirat, University Paris Est Créteil (UPEC), France
    Mihail Antchev, Technical University - Sofia, Bulgaria
    Rui Araujo, University of Coimbra, Portugal
    Gustavo Arroyo-Figueroa, Instituto Nacional de Electricidad y Energías Limpias, Mexico
    T. Asokan, Indian Institute of Technology Madras, India
    Mohamed Amine Atoui, Lab-STICC, France
    Augusto Luis Ballardini, Universita degli studi di Milano Bicocca, Italy
    Alfonso Baños, Universidad de Murcia, Spain
    Ramiro Barbosa, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
    Guilherme Barreto, Universidade Federal do Ceará, Brazil
    Dennis Barrios-Aranibar, Universidad Católica San Pablo, Peru
    Marcelo Becker, Escola de Engenharia de S?o Carlos, Brazil
    Carsten Behn, Schmalkalden University of Applied Sciences, Germany
    Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
    Lyes Benyoucef, Aix-Marseille University, France
    Karsten Berns, University of Kaiserslautern, Germany
    Arijit Bhattacharya, University of East Anglia, United Kingdom
    Reinaldo Bianchi, Centro Universitario da FEI, Brazil
    Mauro Birattari, Université Libre de Bruxelles, Belgium
    Jean-Louis Boimond, ISTIA - LARIS, France
    Magnus Boman, The Royal Institute of Technology, Sweden
    Glen Bright, University of KwaZulu-Natal, South Africa
    Marvin Bugeja, University of Malta, Malta
    Kevin Burn, University of Sunderland, United Kingdom
    Kenneth Camilleri, University of Malta, Malta
    Bin Cao, Hebei University of Technology, China
    Alessandro Casavola, University of Calabria, Italy
    Marco Castellani, University of Birmingham, United Kingdom
    Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
    Yuh-Min Chen, National Cheng Kung University, Taiwan, Republic of China
    Albert Cheng, University of Houston, United States
    Paul Christodoulides, Cyprus University of Technology, Cyprus
    Feng Chu, University of Evry Val d'Essonne, France
    Daisuke Chugo, Kwansei Gakuin University, Japan
    Carlos Coello, CINVESTAV-IPN, Mexico
    Armando Colombo, Schneider Electric GmbH, France
    James Conrad, University of North Carolina at Charlotte, United States
    Yechiel Crispin, Embry-riddle Aeronautical University, United States
    Erik Cuevas, Universidad de Guadalajara, Mexico
    José Cunha, University of Trás-os-montes and Alto Douro, Portugal
    Debi Das, Institute Minerals Materials Technology, India
    Manohar Das, Oakland University, United States
    Angel Del Pobil, Universitat Jaume I, Spain
    Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
    Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
    Guilherme DeSouza, University of Missouri, United States
    Paolo Di Giamberardino, Sapienza University of Rome, Italy
    Alexandre Dolgui, IMT Atlantique, France
    Hans Doran, Zurich University of Applied Sciences, Switzerland
    António Dourado, University of Coimbra, Portugal
    Vasile Dragan, Romanian Academy, Romania
    Venky Dubey, Bournemouth University, United Kingdom
    Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
    Guy Dumont, UBC, Canada
    Richard J. Duro, Universidade Da Coru?a, Spain
    Marc Ebner, Ernst-Moritz-Arndt-Universit?t Greifswald, Germany
    Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
    Krystian Erwinski, Institute of Engineering and Technology, Nicolaus Copernicus University Poland, Poland
    Simon Fabri, University of Malta, Malta
    Mohammed Fadali, UNR, United States
    Christophe Farges, Bordeaux University, IMS – UMR 5218 CNRS, France
    Manuel Ferre Perez, Universidad Politecnica Madrid, Spain
    Paolo Fiorini, University of Verona, Italy
    Juan Flores, University of Michoacan, Mexico
    Mauro Franceschelli, Università di Cagliari, Italy
    Georg Frey, Chair of Automation and Energy Systems, Saarland University,, Germany
    Toyomi Fujita, Tohoku Institute of Technology, Japan
    Mauro Gaggero, National Research Council of Italy, Italy
    Iván García Daza, University of Alcalá, Spain
    Maria Garcia-Planas, Universitat Politecnica de Catalunya, Spain
    Wojciech Giernacki, Poznan University of Technology/ Institute of Control, Robotics and Information Engineering, Poland
    Paulo Gil, Universidade Nova de Lisboa, Portugal
    Giuseppina Gini, Politecnico di Milano, Italy
    Luis Gomes, UNL/UNINOVA, Portugal
    Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
    Lucian Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
    Mathieu Grossard, Atomic Energy and Alternative Energies Commission, France
    Lech Grzesiak, Warsaw University of Technology, Poland
    Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
    Maki Habib, The American University in Cairo, Egypt
    Kensuke Harada, Osaka University, Japan
    Jennifer Harding, Loughborough University, United Kingdom
    Arturo Hernández - Aguirre, Centre for Research in Mathematics, Mexico
    Noelia Hernández Parra, Universidad de Alcalá, Spain
    Yasuhisa Hirata, Tohoku University, Japan
    Wladyslaw Homenda, Warsaw University of Technology, Poland
    Zeng-Guang Hou, Chinese Academy of Sciences, China
    Hesuan Hu, Xidian Univ., China
    Daniela Iacoviello, Sapienza University of Rome, Italy
    Koji Ikuta, University of Tokyo, Japan
    Gianluca Ippoliti, Università Politecnica delle Marche, Italy
    Dmitry Ivanov, Berlin School of Economics and Law, Germany
    Sarangapani Jagannathan, Missouri University of Science and Technology, United States
    Michael Jenkin, York University, Canada
    Myong Jeong, Rutgers University, United States
    Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
    Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
    Márcio José da Cunha, Federal University of Uberlandia, Brazil
    Fabrício Junqueira, University of S?o Paulo (USP), Brazil
    Michail Kalogiannakis, University of Crete, Greece
    Pavan Kumar Kankar, Indian Institute Technology Indore, India
    Tohru Kawabe, University of Tsukuba, Japan
    Rafael Kelly, CICESE Research Center, Mexico
    DaeEun Kim, Yonsei University, Korea, Republic of
    Jonghwa Kim, University of Science & Technology, Korea, Republic of
    George Kovács, Hungarian Academy of Sciences, Hungary
    S. Kozaitis, Florida Institute Technology, United States
    Krzysztof Kozlowski, Poznan University of Technology, Poland
    Ondrej Krejcar, University of Hradec Kralove, Czech Republic
    Masao Kubo, Narional Defense Academy of Japan, Japan
    Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
    Halina Kwasnicka, Wroclaw University of Technology, Poland
    Sébastien Lahaye, Istia - LARIS, France
    H. Lam, King's College London, United Kingdom
    Kauko Leiviskä, University of Oulu, Finland
    Roland Lenain, Irstea, France
    Fabrizio Leonardi, FEI University, Brazil
    Rory Lewis, University of Colorado, United States
    Tsai-Yen Li, National Chengchi University, Taiwan, Republic of China
    Christos Liambas, , Greece
    Hualou Liang, Drexel University, United States
    Huei-Yung Lin, National Chung Cheng University, Taiwan, Republic of China
    Kai Liu, The University of Liverpool, United Kingdom
    Ángel Llamazares, Universidad de Alcalá, Spain
    ChuKiong Loo, University of Malaya, Malaysia
    Antonio Lopes, University of Porto, Portugal
    Sérgio Lopes, University of Minho, Portugal
    Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
    Ping Lou, Wuhan University of Technology, China
    Yu-Shen Lu, National Taiwan Normal University, Taiwan, Republic of China
    Eric Lucet, CEA -French Alternative Energies and Atomic Energy Commission, France
    Martin Lukac, Nazarbayev University, Kazakhstan
    Danilo Maccio, National Research Council of Italy, Italy
    José Machado, Institute of Engineering, Polytechnic of Porto, Portugal
    Douglas Macharet, Universidade Federal De Minas Gerais, Brazil
    Anthony Maciejewski, Colorado State University, United States
    Ana Madureira, ISEP/IPP, Portugal
    Magdi Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
    Om Malik, University of Calgary, Canada
    Philippe Martinet, INRIA, France
    Tariq Masood, University of Cambridge, United Kingdom
    Ross McAree, University of Queensland, Australia
    Seán McLoone, Queen's Unviersity Belfast, Ireland
    Wenchao Meng, Carleton University, Canada
    Nadhir Messai, CReSTIC, France
    Konstantinos Michail, Cyprus University of Technology, Cyprus
    Sanya Mitaim, Thammasat University, Thailand
    Dusmanta Kumar Mohanta, Birla Institute Technology Mesra Ranchi, India
    Francesco Morabito, University Mediterranea of Reggio Calabria, Italy
    Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
    Vassilis Moulianitis, University of the Aegean, Greece
    George Moustris, National Technical University of Athens, Greece
    Riccardo Muradore, University of Verona, Italy
    Saeid Nahavandi, Deakin University, Australia
    Cairo Nascimento, Instituto Tecnológico de Aeronáutica, Brazil
    Andreas Nearchou, University of Patras, Greece
    Juan J. Nieto, University of Santiago de Compostela, Spain
    Shimon Nof, Purdue University, United States
    Ivan Nunes da Silva, University of S?o Paulo, Brazil
    Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
    Stamatis Papadakis, University of Crete, Greece
    Ju H. Park, Yeungnam University, Korea, Republic of
    Igor Paromtchik, INRIA, France
    Ignacio Parra-Alonso, University of Alcalá, Spain
    Federica Pascucci, Roma Tre, Italy
    Pierre Payeur, University of Ottawa, Canada
    Dariusz Pazderski, Poznan University of Technology, Poland
    Qingjin Peng, University of Manitoba, Canada
    Fernando Pereira, University of Porto, Portugal
    Carlos Pereira, Federal University of Rio Grande Do Sul - UFRGS, Brazil
    D. Pham, The University of Birmingham, United Kingdom
    Son Phung, University of Wollongong, Australia
    Aurelio Piazzi, Università degli Studi di Parma, Italy
    S. Ponnambalam, University Malaysia Pahang, Malaysia
    Nirvana Popescu, University Politehnica of Bucharest, Romania
    Raul Marin Prades, Jaume I University, Spain
    Radu-Emil Precup, Politehnica University of Timisoara, Romania
    Libor Preucil, Czech Technical University in Prague, Czech Republic
    Xiaobo Qu, Xiamen University, China
    Gobithaasan R.U., University Malaysia Terengganu, Malaysia
    José Ragot, Centre de Recherche en Automatique de Nancy, France
    Muhammad Asif Zahoor Raja, COMSATS University Islamabad, Pakistan
    Akshay Rajhans, MathWorks, United States
    Oscar Reinoso, Miguel Hernandez University, Spain
    Mihailo Ristic, Imperial College London, United Kingdom
    Roseli Romero, University of S?o Paulo, Brazil
    Juha Röning, University of Oulu, Finland
    Hubert Roth, University Siegen, Germany
    António Ruano, University of Algarve, Portugal
    Yassine Ruichek, Université de Technologie Belfort-Montbeliard, France
    Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
    Christophe Sabourin, IUT Sénart, University Paris-Est Creteil (UPEC), France
    Carlos Sagüés, Universidad de Zaragoza, Spain
    Mehmet Sahinkaya, Kingston University London, United Kingdom
    Priti Sajja, Sardar Patel University, India
    Antonio Sala, Universidad Politecnica de Valencia, Spain
    Addisson Salazar, Universitat Politècnica de València, Spain
    Abdel-Badeeh Salem, Ain Shams University, Egypt
    VEERA RAGAVAN Sampath Kumar, , Malaysia
    Marcello Sanguineti, University of Genoa, Italy
    Nilanjan Sarkar, Vanderbilt University, United States
    Jurek Sasiadek, Carleton University, Canada
    Daniel Sbarbaro, Universidad de Concepcion, Chile
    Daniel Schmidt, SEW EURODRIVE GmbH, Germany
    Gerald Seet, Nanyang Technological University, Singapore
    João Sequeira, Instituto Superior Técnico, Portugal
    Roman Sergienko, Gini GmbH, Germany
    Madhavan Shanmugavel, SRM Institute of Science and Technology, India
    Jinhua She, Tokyo University of Technology, Japan
    Bijan Shirinzadeh, Monash University, Australia
    Michael Short, Teesside University, United Kingdom
    Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
    Carlos Silvestre, University of Macau, China, and Instituto Superior Técnico, Universidade de Lisboa, Portugal, China
    Vasile Sima, National Institute for Research & Development in Informatics, Romania
    Dan Simon, Cleveland State University, United States
    Daniel Simon, INRIA, France
    Arpita Sinha, IIT Bombay, India
    Adam Slowik, Koszalin University of Technology, Poland
    Andrzej Sluzek, Khalifa University, United Arab Emirates
    Gustavo Soares, PUC-MG, Brazil
    Stefano Squartini, Università Politecnica delle Marche, Italy
    J. Stigter, Wageningen University, Netherlands
    Olaf Stursberg, University of Kassel, Germany
    Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
    Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
    Tianhao Tang, Shanghai Maritime University, China
    Tomasz Tarczewski, Nicolaus Copernicus University, Poland
    Abdelhamid Tayebi, Lakehead University, Canada
    Hakan Temeltas, Istanbul Technical University, Turkey
    Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
    Gui Tian, Newcastle University, United Kingdom
    Geetam Tomar, Machine Intelligence Research Labs, India
    Germano Torres, PS Solutions, Brazil
    Wa-Muzemba Tshibangu, Morgan State University, United States
    Nikos Tsourveloudis, Technical University of Crete, Greece
    Ali Turgut, Middle East Technical University, Turkey
    José Valente de Oliveira, Universidade do Algarve, Portugal
    Roberto Valenti, MathWorks, United States
    Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
    César Vargas Rosales, ITESM - Monterrey, Mexico
    Ramiro Velazquez, Universidad Panamericana, Mexico
    Douglas Vieira, ENACOM, Brazil
    Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
    Arnoud Visser, Universiteit van Amsterdam, Netherlands
    Ljubo Vlacic, Griffith University, Australia
    Damir Vrancic, Jo?ef Stefan Institute, Slovenia
    Bernardo Wagner, Leibniz Universit?t Hannover, Germany
    Feng Wan, University of Macau, Macau
    Peiliang Wang, Huzhou University, China
    Qian Wang, Manhattan College, University of Iowa, United States
    Jingyu Wang, Northwestern Polytechnical University (NPU), China
    Long Wang, Peking University, China
    Warren White, Kansas State University, United States
    Min Wu, China University of Geosciences, China
    Farouk Yalaoui, University of Technology of Troyes, France
    Qinmin Yang, Zhejiang University, China
    Qiangda Yang, Northeastern University, China
    Weiwei Yu, Northwestern Polytechnical University, China
    Marek Zaremba, Université du Québec (UQO), Canada
    Jie Zhang, Newcastle University, United Kingdom
    Primo Zingaretti, Università Politecnica delle Marche, Italy
    Alois Zoitl, Johannes Keppler University, Austria
    Ming Zuo, University of Alberta, Canada

    (list not yet complete)

    footer
  • 六福彩票注册网站

    上海体育彩票网

    m5体彩

    万福彩票网

    天禧彩的网登陆网址

    鸿丰在线/登录彩

    www .393802 .com

    www.qianyi11

    体育即时比分